Genium X3 bionic prosthetic system
Discovering new horizons
Genium X3 – explore new horizons
The Genium X3 benefits from the unique combination of technology, functionality and intuitive use. With this leg prosthesis system, the virtually natural replication of the physiological human gait is possible.
The Genium X3 opens up entirely new possibilities: showering, going swimming or at work – since the system is water and corrosion-resistant, it stands up to any ambient conditions. Users who are undaunted by any challenge value the highly robust protector. It stands up to the highest strain. Walking backwards, climbing stairs step-over-step or walking at changing speeds and with different stride lengths – the joint is intuitive to use and flexible in adapting to the circumstances. The running mode was developed especially for sports. This mode provides the settings needed for jogging or running with the Genium X3. In order to bring the lower leg back to full extension in time, the OPG (optimised physiological gait) function is deactivated in this mode as well. Overall, the Genium X3 offers five additional configurable modes.
Battery and electronics
In the Genium X3, the rechargeable battery and electronics are enclosed and protected by the frame and Protector. The integrated microprocessor coordinates all measurement and control processes.
Additional sensors are integrated in the tube adapter. They not only measure the ankle moment but also the vertical force acting on the joint. The sensor data help make a natural movement pattern possible.
The inductive charger is magnetically attached to the back of the knee joint. It makes charging straightforward, even through clothing or the cosmetic cover.
Knee moment sensor
The knee moment sensor provides important information for precisely determining the forces acting on the prosthesis.
The Protector withstands severe strain and is resistant to scratching and impacts.
You can choose between two different design versions.
Gyroscope, acceleration sensor and angle sensor
The gyroscope and the acceleration sensor measure the acceleration and position of the Genium X3 in space. The angle sensor determines the flexion angle and flexion angle speed.
Benefits at a glance
You can shower, go swimming or work in wet conditions with the Genium X3: Select materials such as titanium, hard anodised aluminium, stainless steel and high-end coatings combined with especially sealed components protect the joint's sensitive sensor technology and electronics. The Genium X3 is waterproof and corrosion-resistant. It opens up previously unimaginable possibilities.
There are many situations where you need to respond spontaneously: Crossing the street, when a car appears unexpectedly, or when you have children who can always get you into unexpected situations. The Genium X3 responds easily thanks to walk-to-run mode. Switching from walking to running is detected by the electronics within microseconds and the auto-adaptive joint reacts.
Participating in sports
No matter what you demand from yourself in sports, running mode keeps up. It was developed especially for sports activities. Its functions are adapted to running behaviour and based on the natural model. For example, an increased maximum flexion angle of the knee joint required for running is taken into account.
Suitable for everyday use
Walking slow or fast, climbing stairs step-over-step, crossing obstacles with a natural movement, standing safely on slopes or walking backwards: Thanks to the latest computer, sensor and control technology, the Genium X3 responds intelligently to various everyday situations. It even adapts to different shoe weights and clothing.
A suitable foot
The Triton prosthetic feet are perfect for highly active users. Especially robust, the Triton Heavy Duty has a high load capacity and is resistant to water and corrosion.
In order to withstand the many stresses of everyday life, the Protector made of durable PU material covers the knee joint and stands up to even severe strain easily.
The best way to walk is with a natural, physiological gait – whether it be during a relaxed stroll through the city or quickly sprinting to the bus. It is exactly this gait that the Genium X3 replicates almost identically, phase for phase. No matter on what surface, no matter at what speed. With the Genium X3, we have bundled this technology under the term "Optimised Physiological Gait" (OPG). It relieves strain on the entire locomotor system, improves wearer comfort and opens up entirely new freedom of movement for the amputee.
The knee joint is already pre-flexed when the heel strikes the ground – the way it is with a natural leg. This is automatically controlled by the electronics. You require less force to initiate a step, since the prosthetic foot makes full-surface contact with the ground more quickly.
2. Adaptive yielding control
Intelligent knee flexion control with full-surface contact between the prosthetic foot and the ground is depending on the forces acting on the prosthesis. You can safely negotiate hills, uneven terrain and slopes, need to pay less attention to controlling your prosthesis and are able to use it intuitively. Flexion also dampens the impact of the foot, which decreases compensating movements and therefore significantly reduces subsequent orthopaedic problems as well.
3. Dynamic stability control
This is an innovative and patented method to monitor all movement situations. Six different parameters are continuously recorded in order to define the optimum switching point between the stance and swing phase. For you this translates into enhanced safety, among other things when walking backwards or lunging.
4. Adaptive swing phase control
The quality of the swing phase with the Genium X3 is comparable to the natural model. The lower leg pendulum movement is precisely limited to 65° of flexion – regardless of the walking speed. The increased ground clearance minimises the risk of tripping and falling. Even on slopes, the angle-independent swing phase ensures sufficient ground clearance. There is no limitation of step variance, no matter whether you are taking short or long steps, or walking slow, fast or at irregular speed. The system even adapts intelligently to the respective shoe soles and clothing.
A prosthesis is only as good as the user's ability to handle it! The Genium X3 is an innovative knee joint that offers you numerous functions. However, these functions have to be learned and practiced, especially in the beginning. This is the only way you can fully utilise the functionality of the Genium X3.
With "Genium Gait Training", Ottobock has developed a training programme that instructs therapists, technicians and users in detail about conducting efficient gait training. This gait training can be used for the Genium X3 as well. The programme is illustrated with clear videos. Activities which are practiced include walking backwards, going down stairs and negotiating slopes as well as the Genium X3 standing function, sitting, climbing stairs step-over-step and much more. Numerous exercises have been selected to increase safety and confidence early on in using the Genium X3.
Ideal prosthetic components
Triton: The prosthetic feet from the Triton family of products are suitable for active users. They are made of a set of flexible carbon springs. This design allows the foot to function as a flexible unit, which creates a particularly smooth rollover. Notwithstanding the system's ability to move, the Triton feet provide a consistently high level of stability when walking and especially when standing. Furthermore, the foot's special structure ensures a powerful transition to the swing phase and a highly variable stride length. At the same time, the split forefoot section gives the user the necessary control to deal with uneven ground and quick changes of direction. The Triton is extremely well suited for meeting the requirements of an active lifestyle. Thanks to its outstanding dynamic response and flexibility, it supports a broad range of applications from everyday use to recreational sports.
Triton Low Profile: The Triton Low Profile makes the excellent functionality of the Triton available even to users with limited space for the integration of a prosthetic foot.
Triton Heavy Duty: The Triton Heavy Duty is especially strong and robust. It features an adapter made of titanium. Non-corrosive metal parts make the foot water-resistant as well.